|
Section 1 - Chemical Product and Company Identification |
Part
Number: UDXTRA Pag Lubricant Type R
Chemical
Name: Polyether
(Polyalkylene Glycol Derivative)
Product
Use: Refrigerant
Oil
Manufacturer Information
|
Apollo
America |
Phone:
(812) 284-3300 |
|
701
Port Road |
Fax:
(812) 284-6840 |
|
Jeffersonville,
IN 47130 |
Emergency
# 1-800-424-9300 (CHEMTREC) |
|
|
|
|
Section 2 - Composition / Information on Ingredients |
Component
Information/Information on Non-Hazardous Components
|
Section 3 - Hazards Identification |
Emergency
Overview
Toxic
fumes may be released in case of fire. Firefighters should wear full protective
clothing and self contained breathing apparatus. If heated above its flashpoint
in the presence of air, product can support combustion.
Label Information
Combustible
liquid. If heated above its flashpoint in the presence of air, product can
support combustion. Launder or discard soiled clothes. Avoid prolonged contact.
Potential
Health Effects: Eyes
This
product may cause irritation to the eyes.
Potential
Health Effects: Skin
Prolonged
and/or repeated skin contact with this product may cause irritation/dermatitis.
Potential
Health Effects: Ingestion
Will
have a laxative effect if swallowed. Low toxicity.
Potential
Health Effects: Inhalation
If
sprayed or misted may cause chemical pnemonitis. Exposure may cause irritation
to eyes, nose, and throat.
|
Section 4 - First Aid Measures
|
First
Aid: Eyes
Immediately
flush eyes with water for at least 15 minutes, while holding eyelids open. Seek medical attention at once.
First
Aid: Skin
For
skin contact, flush with large amounts of water. If irritation persists, get medical attention. Wash contaminated
clothing before reuse.
First
Aid: Ingestion
If
material is ingested, immediately contact a physician or poison control center.
Do not induce vomiting. If vomiting occurs naturally, have victim lean forward
to reduce risk of aspiration.
First
Aid: Inhalation
Move
person to non-contaminated air. If the affected person is not breathing, apply
artificial respiration. Seek medical attention.
First
Aid: Notes to Physician
Provide
general supportive measures and treat symptomatically.
|
Section 5 - Fire Fighting Measures |
|
Flash Point: 250
C |
Method Used: COC |
|
Upper Flammable Limit
(UFL): N/D |
Lower Flammable Limit
(LFL): N/D |
|
Auto Ignition: N/D |
Flammability
Classification: N/D |
|
Rate of Burning: N/D |
|
General Fire
Hazards
This
product is combustible at high temperatures. Shut off the source of fuel, if
possible. Do not cut, weld, solder, drill, grind, or expose containers to heat,
flame, sparks, or other sources of ignition.
Hazardous
Combustion Products
Irritating
and toxic gases or fumes may be released during a fire. Carbon monoxide, carbon
dioxide and other hydrocarbon fragments.
Extinguishing
Media
Dry
chemical, foam, carbon dioxide.
Fire Fighting
Equipment/Instructions
Firefighters
should wear full-face, self contained breathing apparatus and impervious
protective clothing. Firefighters
should avoid inhaling any combustion products. Do not direct a solid stream of
water or foam into hot, burning pools;
this may result in frothing and increase fire intensity.
NFPA Ratings: Health: 2 Fire: 1 Reactivity: 0
Hazard Scale: 0 =
Minimal 1 = Slight 2 = Moderate 3 = Serious 4 = Severe
|
Section 6 - Accidental Release Measures |
Containment
Procedures
Stop
the flow of material, if this is without risk. Eliminate all sources of
ignition or flammables that may come into contact with a spill of this
material. Absorb the spilled material with an inert absorbent (nonflammable)
material. Do not allow the spilled product to enter public drainage system or
open water courses.
Clean-Up
Procedures
Ventilate
the contaminated area. Sweep up or gather material and place in appropriate
container for disposal. Wash spill area thoroughly. Wear appropriate protective
equipment during cleanup. Follow all Local, State, Federal and Provencial
regulations for disposal.
Evacuation
Procedures
Evacuate
the area promptly and keep upwind of the spilled material. Isolate the spill
area to prevent people from entering.
Special
Procedures
Have
emergency equipment readily available.
|
Section 7 - Handling and Storage |
Handling
Procedures
When
using this material, do not eat, drink or smoke. Avoid prolonged or repeated
skin contact with this material. Wash thoroughly after handling.
Storage
Procedures
Store
in a cool, dry, well-ventilated area. Do not handle or store near an open
flame, heat or other sources of ignition. Do not store this material in open or
unlabeled containers.
|
Section 8 - Exposure Controls / Personal Protection |
Exposure
Guidelines
A: General Product Information
Eye
wash fountain and emergency showers are recommended.
B: Component Exposure Limits
This material has no
components listed.
Engineering
Controls
Use
general ventilation and use local exhaust, where possible, in confined or
enclosed spaces.
PERSONAL
PROTECTIVE EQUIPMENT
Personal
Protective Equipment: Eyes/Face
Wear
chemical goggles; face shield (if splashing is possible).
Personal
Protective Equipment: Skin
Wear
impervious gloves for prolonged contact. Normal work clothing (long sleeved
shirts and long pants) is recommended. Do not wear rings, watches, or similar
apparel that could entrap the material and cause a skin reaction.
Personal
Protective Equipment: Respiratory
If
mist is generated (heating, spraying) and engineering controls are not
sufficient, wear approved organic vapor respirator suitable for oil mist.
Personal
Protective Equipment: General
Respirators
should be selected by and used under the direction of a trained health and
safety professional following requirements found in OSHA's respirator standard
(29 CFR 1910.134) and ANSI's standard for respiratory protection (Z88.2-1992).
A written respiratory protection program, including provisions for medical
certification, training, fit testing, exposure assessments, maintenance,
inspection, cleaning, and convenient, sanitary storage must be implemented.
|
Section 9 - Physical & Chemical Properties |
|
Appearance: |
Clear
Oily Liquid |
Odor: |
Mild |
|
Physical
State: |
Liquid |
pH: |
N/D |
|
Vapor
Pressure: |
N/D |
Vapor
Density: |
N/D |
|
Boiling
Point: |
N/D |
Melting
Point: |
N/A |
|
Solubility
(H2O): |
Insoluble |
Specific
Gravity: |
1.0000 |
Physical
Properties: Additional Information
No
additional information available.
|
Section 10 - Chemical Stability & Reactivity Information |
Chemical
Stability
Stable
under normal conditions.
Chemical
Stability: Conditions to Avoid
Keep
away from heat, sparks, or open flame.
Incompatibility
This
product may react with strong oxidizing agents.
Hazardous
Decomposition
Hazardous
combustion products may include carbon monoxide, carbon dioxide and hydrocarbon
fragments.
Hazardous
Polymerization
Will
not occur.
|
Section 11 - Toxicological Information |
General
Toxicity
A: General Product Information
No
additional information available.
B: Component Analysis - LD50/LC50
This material has no
components listed.
Carcinogenicity
A: General Product Information
Not
listed by ACGIH, IARC, NIOSH, NTP OR OSHA.
B: Component Carcinogenicity
This material has no
components listed.
|
Section 12 - Ecological Information |
Ecotoxicity
A: General Product Information
No
information available.
B: Component Analysis -
Ecotoxicity - Aquatic Toxicity
This material has no
components listed.
Environmental
Fate
No
information available for the product. Do not allow this material to drain into
sewers/water supplies.
|
Section 13 - Disposal Considerations |
US EPA Waste
Number & Descriptions
A: General Product Information
Material,
if discarded, is not expected to be a characteristic hazardous waste under
RCRA. You must test your waste using methods described in 40 CFR Part 261 to
determine if it meets applicable definitions of hazardous wastes.
B: Component Waste Numbers
This material has no
components listed.
Disposal
Instructions
Recycling
of this product is encouraged. Dispose of waste material according to Local,
State, Federal, and Provincial Environmental Regulations.
|
Section 14 - Transportation Information |
US DOT
Information
Shipping
Name:Additional Info.:
International
Transportation Regulations
NOTE:
The data in this section (Section 14) is meant as a guide to the overall
classification of the product. However,
transportation classifications may be subject to change with changes in package
size. Consult shipper requirements
under I.M.O., I.C.A.O. (I.A.T.A.) and 49 CFR to assure regulatory compliance.
|
Section 15 - Regulatory Information |
US Federal
Regulations
A: General Product Information
This
product is listed on the U.S. EPA TSCA Inventory.
B: Component Analysis
This material has no
components listed.
State
Regulations
A: General Product Information
Other
state regulations may apply. Check
individual state requirements.
B: Component Analysis - State
This material has no
components listed.
Other Regulations
A: Component Analysis
This material has no
components listed.
B: Component Analysis - WHMIS IDL
This material has no
components listed.
|
Section 16 - Other Information
|
Other
Information
The
information herein is presented in good faith and believed to be accurate as of
the effective date given. However, no warranty, expressed or implied, is given.
It is the buyer's responsibility to ensure that its activities comply with
Federal, State or provincial, and local laws.
Key/Legend
EPA
= Environmental Protection Agency; TSCA
= Toxic Substance Control Act;
ACGIH = American Conference of
Governmental Industrial Hygienists;
IARC = International Agency for Research on Cancer; NIOSH = National Institute for Occupational
Safety and Health; NTP = National
Toxicology Program; OSHA = Occupational
Safety and Health Administration., NJTSR
= New Jersey Trade Secret Registry. HMIS = Hazardous Material
Information System. NFPA = National Fire Protection Association. OSHA =
Occupational Safety and Health Administration. NTP = National Toxicology
Program. NIOSH = National Institute of Occupational Safety and Health. ACGIH =
American Conference of Governmental Industrial Hygienists.
Contact: Teresa Summers
Contact
Phone: (812)
285-8277
This
is the end of MSDS # 2821